Technical specification - TempoForm
Tolerances
Our TempoForm process casts correspond to the GTA 14/5 DIN 1688 standard, also corresponding to the ISO 8062 standard.
Surface finish
4-5 µm
Wall thickness
From 0,6 - 1 mm on smaller sections. Larger areas must be designed with a minimum 1.5 mm wall thickness.
Porosity can occur in heavy sections.
Draft angles
No draft angles are required
Alloys
Aluminium: EN AC42100, EN AC46000, EN AC44300
Magnesium: AZ91
Zink: ZA8
Please contact us if you have questions concerning these specifications.